Need any help or advice?
Contact Us
Specification
General Properties
| Gross Weight | 0.01 | kg |
|---|
Shipping Information
Non Hazardous
This product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
Spray Nozzle for 50ml (1.75oz) and 250ml (8.5oz) Bottle
- SN-24-BLK
- No reviews
Disposable replacement spray nozzle for our S120 board sealer 50ml (1.75oz) and 250ml (8.5oz) bottles. After use, the S120 board sealer will set inside the nozzle meaning that the nozzle needs to be replaced for each use; keep a stock of these replacement nozzles handy for future use.
Priced individually, volume discounts apply.
Trade discounts
| 0-9 | 10+ |
|---|---|
| $1.50 | $1.15 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Disposable plastic trigger spray nozzle suitable for our S120 Advanced Board & Mold Sealer 50ml (1.75oz) and 250ml (8.5oz) pack sizes.
This spray nozzle can be used to apply a fine mist of board sealer on the surface of patterns and molds and is recommended when building up the first heavier layers of board sealer. Although not as controllable as a compressed air driven spray gun, these simple spray nozzles offer a convenient way to spray apply the sealer with minimum overspray, set-up and clean-down.
Further Information
Nozzle Life
S120 is fast curing and will cure inside the spray nozzle once left for more than around 30 mins. This means that one nozzle can be used to make multiple spray applications at - for example - 20 minute intervals but if you are leaving longer between applications or are finished for this session then the sealer will cure in the nozzle and it should be disposed of. It is suggested to purchase a number of spare nozzles.
IMPORTANT: Remove Nozzle After Use
Once you are finished for the session, it is essential to remove the nozzle from the bottle and tightly screw the original cap back on. Do no leave the nozzle (and tube) on the S120 bottle otherwise contamination and premature expiry will occur.
1L (34oz) Pack Size
This spray nozzle fits the 50ml (1.75oz) and 250ml (8.5oz) pack sizes only. It does NOT fit the 1L (34oz) size can. If you would like to use a spray nozzle with the 1L (34oz) can, we would suggest purchasing a 50ml (1.75oz) pack and using this -with a spray nozzle - as a refillable spray dispenser.
Trade discounts
| 0-9 | 10+ |
|---|---|
| $1.50 | $1.15 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Disposable plastic trigger spray nozzle suitable for our S120 Advanced Board & Mold Sealer 50ml (1.75oz) and 250ml (8.5oz) pack sizes.
This spray nozzle can be used to apply a fine mist of board sealer on the surface of patterns and molds and is recommended when building up the first heavier layers of board sealer. Although not as controllable as a compressed air driven spray gun, these simple spray nozzles offer a convenient way to spray apply the sealer with minimum overspray, set-up and clean-down.
Further Information
Nozzle Life
S120 is fast curing and will cure inside the spray nozzle once left for more than around 30 mins. This means that one nozzle can be used to make multiple spray applications at - for example - 20 minute intervals but if you are leaving longer between applications or are finished for this session then the sealer will cure in the nozzle and it should be disposed of. It is suggested to purchase a number of spare nozzles.
IMPORTANT: Remove Nozzle After Use
Once you are finished for the session, it is essential to remove the nozzle from the bottle and tightly screw the original cap back on. Do no leave the nozzle (and tube) on the S120 bottle otherwise contamination and premature expiry will occur.
1L (34oz) Pack Size
This spray nozzle fits the 50ml (1.75oz) and 250ml (8.5oz) pack sizes only. It does NOT fit the 1L (34oz) size can. If you would like to use a spray nozzle with the 1L (34oz) can, we would suggest purchasing a 50ml (1.75oz) pack and using this -with a spray nozzle - as a refillable spray dispenser.
Specification
General Properties
| Gross Weight | 0.01 | kg |
|---|
ASK YOUR OWN QUESTION
Customer Product Reviews for Spray Nozzle for 50ml (1.75oz) and 250ml (8.5oz) Bottle
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewSUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewShipping Information
Non Hazardous
This product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2025. All rights reserved.