Super White CULR Epoxy Pigment

Universal Pigment for Translucent Tint and Solid Opaque Color

CULR™ pigments can be used both to create subtle, see-through, translucent color tints and also for strong, vibrant, solid colors, simply by varying the amount of pigment added to your resin.

These universal epoxy pigments can be used to tint resin river tables and clear castings or add strong, vibrant, opaque color to resin for projects including resin flow art, counter-tops, decorative flooring, wood inlays, castings and more.

A translucent color tint can be achieved by adding just a drop or two into your resin mix. For solid colors, simply add more pigment until the desired opacity is achieved. See the table below for a guide to pigment levels.

Super Concentrated

CULR pigments are one of the most concentrated resin pigments you can buy and the advanced liquid formula ensures that these intense pigments disperse in seconds although this white pigment will require much higher concentrations than most other colors.

For a solid, opaque white colors, up to 500g (500ml) of epoxy resin can be pigmented using a single 20ml bottle of CULR pigment.

For a translucent color tint, much less pigment is required. A single 20ml bottle is enough to produce a see-through, diffused opal-type effect in up to 50kgs of resin!

The exact amount of pigment needed varies from color to color and intensity required. This Super White pigment but will typically use around 0.1% for a translucent appearance and up to 10% for a solid, opaque color, particularly when used in a thin coating.

Pigmenting for Primer Coats

When using CULR pigments to create a highly opaque ‘primer coat’ in projects such as resin countertops, a very high pigment ratio of 10% should be used. Such a high ratio will ensure the very strong, opaque color necessary to block-out existing countertops or textures of wood substrates below.

The ratio of 10% pigment to resin is especially important if using light colors like Super White or metallic CULR pigments.

Blend to Create any Color

CULR pigments are designed to be blended with each other to create almost infinite color and shade possibilities.

For resin artists creating flow art -type pieces or makers wishing to create realistic multi-tone marble / stone coat effects, CULR pigments have been developed to work together as a complete color system, allowing almost any color to be created simply by blending any of the colors whilst adding drops of white or black can adjust the saturation and brightness to create infinite possibilities.

Adding a few drops of thisSuper White pigment any of the other colors in the CULR pigment range can create precise shades from off-white - to pastels - to a rich deep colors, as shown on the tone charts on each color's listing.

We have not tested blending the CULR pigments with other pigment brands and types and although in many cases it may work, we would recommend testing specifically to ensure there is not a compatibility issue with another brand of pigment.

How to Use

CULR™ pigments are super-easy to use; just drip the desired amount of any color into either mixed resin and hardener or into just the resin side only (if you want to pigment the resin in advance of using it).

Depending on the opacity of the color required you'll need anywhere between 0.1% and 10% of this Super White pigment. The tables below provide an easy reference as to how much pigment to add or simply keep adding drops until you get the desired color strength.

Super White Pigment Ratio Guide

Compatibility

CULR pigments are designed specifically for use with clear epoxy resins. They have been thoroughly tested with the GlassCast range of casting and coating resins but should also work with most other clear epoxy systems, although we always recommend conducting a test first.

CULR pigments are not suitable for use with alternative resin types such as polyurethane.