Need any help or advice?Contact Us

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

IN2 Epoxy Infusion Resin FAST/SLOW 1kg (37oz) Kit Thumbnail
EP-IN2-FS-1IN2 Epoxy Infusion Resin FAST/SLOW 1kg (37oz) Kit$34.55 /kit

Lantor Soric SF Infusion Core (1270mm) T=2mm Thumbnail
SORIC2Lantor Soric SF Infusion Core (1270mm) T=2mm$16.95 /linear metre

210g (6.2oz) 3x1 Twill 3k Carbon Kevlar Cloth 1200mm (47") Thumbnail
CK-31-210-120210g (6.2oz) 3x1 Twill 3k Carbon Kevlar Cloth 1200mm (47")$38.85 /linear metre

210g (6.2oz) 2x2 Twill 3k Carbon Fiber Cloth 1000mm (39") Thumbnail
CF-22-210-100210g (6.2oz) 2x2 Twill 3k Carbon Fiber Cloth 1000mm (39")$32.90 /linear metre

GC50 Epoxy Compatible Clear Polyester Gelcoat 1kg (37oz) Thumbnail
GC50-1GC50 Epoxy Compatible Clear Polyester Gelcoat 1kg (37oz)$52.50 /pack

200g (5.9oz) 2x2 Twill 3k Black Stuff Carbon Fiber Cloth 1000mm (39") Linear Metres (1.1yds) Thumbnail
BS-22-200-100200g (5.9oz) 2x2 Twill 3k Black Stuff Carbon Fiber Cloth 1000mm (39") Linear Metres (1.1yds)$20.00 /linear metre

Total $0.00

CUSTOMER GALLERY

Race Car Project - Time Attack Series

This project was to reduce the weight of the race car that Sam races in the UK Time Attack Series.

To achieve this Sam produced moulds of the original doors, inside and out using gel coat, fibreglass matting of various weights and resin.

After the moulds were made, the next step was the lay-up using layers of 210gsm carbon 2x2 twill, 2mm lantor soric and finally 210gsm Carbon Kevlar 2x2 twill, the whole setup was then infused with IN2 resin.

The finished product came in at 3.4kg, with the stock doors weighing in a little over 21kg!

Sam said he is over the moon with the final result and has learnt lots throughout the process.


ABOUT SAM PICKERING

Sam is an aerospace engineer and works on the Airbus A350 carbon composite aircraft, specifically the wings.

Although this has given him a good grounding and knowledge in the field, this project has taught lots which he will take forward going into future projects.


CONTACT INFORMATION

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

IN2 Epoxy Infusion Resin FAST/SLOW 1kg (37oz) Kit Thumbnail
EP-IN2-FS-1IN2 Epoxy Infusion Resin FAST/SLOW 1kg (37oz) Kit$34.55 /kit

Lantor Soric SF Infusion Core (1270mm) T=2mm Thumbnail
SORIC2Lantor Soric SF Infusion Core (1270mm) T=2mm$16.95 /linear metre

210g (6.2oz) 3x1 Twill 3k Carbon Kevlar Cloth 1200mm (47") Thumbnail
CK-31-210-120210g (6.2oz) 3x1 Twill 3k Carbon Kevlar Cloth 1200mm (47")$38.85 /linear metre

210g (6.2oz) 2x2 Twill 3k Carbon Fiber Cloth 1000mm (39") Thumbnail
CF-22-210-100210g (6.2oz) 2x2 Twill 3k Carbon Fiber Cloth 1000mm (39")$32.90 /linear metre

GC50 Epoxy Compatible Clear Polyester Gelcoat 1kg (37oz) Thumbnail
GC50-1GC50 Epoxy Compatible Clear Polyester Gelcoat 1kg (37oz)$52.50 /pack

200g (5.9oz) 2x2 Twill 3k Black Stuff Carbon Fiber Cloth 1000mm (39") Linear Metres (1.1yds) Thumbnail
BS-22-200-100200g (5.9oz) 2x2 Twill 3k Black Stuff Carbon Fiber Cloth 1000mm (39") Linear Metres (1.1yds)$20.00 /linear metre

Total $0.00

ABOUT SAM PICKERING

Sam is an aerospace engineer and works on the Airbus A350 carbon composite aircraft, specifically the wings.

Although this has given him a good grounding and knowledge in the field, this project has taught lots which he will take forward going into future projects.


CONTACT INFORMATION

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Discover logo Diners Club logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2025. All rights reserved.