Need any help or advice?Contact Us
Width | 1500 | mm |
---|---|---|
Film Thickness | 28 | μm |
Colour | Blue | |
---|---|---|
Type | Release Film | |
Format | Flat Film | |
Chemistry / Material | Polyolefines and HDPE |
Max Service Temp | 120 | °C |
---|
Features | Perforation | Yes |
---|
Gross Weight | 0.482 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
There are no package size restrictions or surcharges for this product.
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
R120 is a very cost-effective, general purpose release film with P3 perforations suitable for use at temperatures up to 120°C (248°F). It is recommended when vacuum bagging hand-layup laminates.
1.5m (59") wide, flat sheet format. Available to buy online in a 5lm (5.5lyd) folded pack, by the linear meter or in full 100lm (110lyd) rolls.
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
AeroFilm® R120-P3 is a general purpose composite release film P3 perforated suitable for use at temperatures up to 120°C (248°F).
R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. Its P3 perforations provide the ideal restriction to resin flow between the wet laminate and the breather/soaker layer, allowing surplus resin to be drawn out of the laminate without excessive bleed-off of the resin.
Typical Uses
Commonly used for and recommended for:
R120-P3 is equally suited to debulking prepreg laminates where it will prevent the breather layer from sticking to the uncured prepreg and then easily release from the laminate after debulking.
How to Buy
This release film is available to buy in a folded 5lm (5.5lyd) pack, by the linear meter (10lm/11lyd minimum order) or in wholesale rolls of 250lm/275lyd (375sqm). Please choose how you would like to purchase from the drop-down list above.
The film itself is 1.50m (59") wide in a single sheet meaning that each linear meter is equal to 1.5sqm.
Volume Pricing
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above::
Further Information
Most commonly used when vacuum bagging a wet layup laminate, peel ply would be placed against the wet laminate, followed by the R120-P3 Perforated Release Film, followed by a breather/soaker layer (so absorb excess resin squeezed from the laminate), enclosed within vacuum bagging film.
AeroFilm® R120-P3 is a general purpose composite release film P3 perforated suitable for use at temperatures up to 120°C (248°F).
R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. Its P3 perforations provide the ideal restriction to resin flow between the wet laminate and the breather/soaker layer, allowing surplus resin to be drawn out of the laminate without excessive bleed-off of the resin.
Typical Uses
Commonly used for and recommended for:
R120-P3 is equally suited to debulking prepreg laminates where it will prevent the breather layer from sticking to the uncured prepreg and then easily release from the laminate after debulking.
How to Buy
This release film is available to buy in a folded 5lm (5.5lyd) pack, by the linear meter (10lm/11lyd minimum order) or in wholesale rolls of 250lm/275lyd (375sqm). Please choose how you would like to purchase from the drop-down list above.
The film itself is 1.50m (59") wide in a single sheet meaning that each linear meter is equal to 1.5sqm.
Volume Pricing
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above::
Further Information
Most commonly used when vacuum bagging a wet layup laminate, peel ply would be placed against the wet laminate, followed by the R120-P3 Perforated Release Film, followed by a breather/soaker layer (so absorb excess resin squeezed from the laminate), enclosed within vacuum bagging film.
Width | 1500 | mm |
---|---|---|
Film Thickness | 28 | μm |
Colour | Blue | |
---|---|---|
Type | Release Film | |
Format | Flat Film | |
Chemistry / Material | Polyolefines and HDPE |
Max Service Temp | 120 | °C |
---|
Features | Perforation | Yes |
---|
Gross Weight | 0.482 | kg |
---|
P3 is a set spacing and hole size for the perforation pattern on the film. In this specific case, this refers to holes of 0.5mm diameter spaced 10mm apart across the whole sheet.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewSUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewThis product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
There are no package size restrictions or surcharges for this product.
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2025. All rights reserved.