Perma-Grit 305mm (12") Rodsaw Blade

Perma-Grit 305mm (12") rodsaw is the perfect solution for following complex shapes when cutting carbon fiber and composites.

The rodsaw is made from tungsten carbide welded to a mild steel rod, making them almost unbreakable and able to cleanly and quickly cut carbon fiber and other composites without 'fraying' or crazing the material being cut.

Typical uses

Perma-Grit rodsaw blades are the perfect choice for the hand cutting intricate shapes in carbon fiber, fiberglass and all other composites. Use a rodsaw for:

• Cutting out recesses in scoops
• Cutting holes for dials and switches in panels
• Cutting holes for speakers in I.C.E. installs

If you are cutting simpler shapes (like gentle curves or straight lines) we would suggest the use of a 305mm hacksaw blade.

Further Information

How to use

Attach the 305mm (12") rodsaw blade to a full sized hacksaw (available from any hardware or tool shop) to cut any shape in your carbon fiber or composite product.

Smooth cut edges using a Perma-Grit file or sanding block. For very intricate shapes such as holes for switches, use a Perma-Grit needle file (all available from Easy Composites) before finishing with rubbing compound and wax.