Need any help or advice?
Contact Us
Specification
Product Data
| Colour | Black | |
|---|---|---|
| Construction | Steel |
General Properties
| Gross Weight | 0.201 | kg |
|---|
Shipping Information
Non Hazardous
This product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
Professional 8 Inch Carbon/Kevlar Scissors
- SC-CK8
- 5/5 Average rating
These high-quality 8" composites scissors are manufactured using our exclusive blade design for effective cutting of dry carbon fabric and other composite reinforcements without slipping or snagging delicate fabrics.
These smaller 8" scissors are better for following accurate patterns. They also provide more leverage and are cutting heavier fabrics (including prepregs) up to around 700gsm (20.7oz/yd).
Trade discounts
| 0-9 | 10+ |
|---|---|
| $68.30 | $64.65 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
The ultimate scissors for carbon, Kevlar® and general composites
Developed specifically for Easy Composites to our specification, these Sheffield made Wilkinson scissors are designed to offer the very best cutting and handling characteristics when working with Kevlar®, carbon fiber and other advanced composite materials.
The 8" Kevlar/Carbon Fiber Scissors feature a shorter blade, giving them increased leverage compared to our larger 10" Shears making them ideally suited to cutting heaver materials (such as heavy Kevlar/aramid reinforcement, pre-preg carbon fiber and chopped strand mat) and their smaller size makes them more manoeuvrable - particularly useful when cutting detailed templates.
The scissors are precision manufactured from high carbon tool steel and completely PTFE coated (using Xylan™ technology). These scissors will remain sharp for much longer than conventional scissors, cut easier (even through heavy Kevlar, glass or pre-preg carbon) and provide a lifetime of service.
They feature a sharp nose to make it easy to get under fabrics for the first cut and precisely adjustable resistance making them a joy to use.
Exclusively to Easy Composites, the serration is applied to the upper blade not the conventional lower blade making it much easier to cut carbon fiber and other valuable fabrics without the serration snagging the fibers as the scissors are moved through the fabric to make the next cut.
Typical Uses
- Kevlar® and other aramid fibers*
- Dry carbon fiber fabric
- Pre-preg carbon fiber fabric
- Chopped strand mat, woven glass fabric
- Wet resin coated carbon/glass fabric
- Rubber (due to low friction coating)
- Thin plastic sheet
Advantages
- Shorter blade provides increased leverage and manoeuvrability
- Blade angle specific to carbon fiber and other composites fabrics
- Serration applied to the upper blade to allow snag-free cutting of expensive fabrics
- Xylan low friction coating for long lasting sharpness and easier cutting
- Precision manufactured from high carbon tool steel
- Adjustable resistance for the perfect feel
Trade discounts
| 0-9 | 10+ |
|---|---|
| $68.30 | $64.65 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
The ultimate scissors for carbon, Kevlar® and general composites
Developed specifically for Easy Composites to our specification, these Sheffield made Wilkinson scissors are designed to offer the very best cutting and handling characteristics when working with Kevlar®, carbon fiber and other advanced composite materials.
The 8" Kevlar/Carbon Fiber Scissors feature a shorter blade, giving them increased leverage compared to our larger 10" Shears making them ideally suited to cutting heaver materials (such as heavy Kevlar/aramid reinforcement, pre-preg carbon fiber and chopped strand mat) and their smaller size makes them more manoeuvrable - particularly useful when cutting detailed templates.
The scissors are precision manufactured from high carbon tool steel and completely PTFE coated (using Xylan™ technology). These scissors will remain sharp for much longer than conventional scissors, cut easier (even through heavy Kevlar, glass or pre-preg carbon) and provide a lifetime of service.
They feature a sharp nose to make it easy to get under fabrics for the first cut and precisely adjustable resistance making them a joy to use.
Exclusively to Easy Composites, the serration is applied to the upper blade not the conventional lower blade making it much easier to cut carbon fiber and other valuable fabrics without the serration snagging the fibers as the scissors are moved through the fabric to make the next cut.
Typical Uses
- Kevlar® and other aramid fibers*
- Dry carbon fiber fabric
- Pre-preg carbon fiber fabric
- Chopped strand mat, woven glass fabric
- Wet resin coated carbon/glass fabric
- Rubber (due to low friction coating)
- Thin plastic sheet
Advantages
- Shorter blade provides increased leverage and manoeuvrability
- Blade angle specific to carbon fiber and other composites fabrics
- Serration applied to the upper blade to allow snag-free cutting of expensive fabrics
- Xylan low friction coating for long lasting sharpness and easier cutting
- Precision manufactured from high carbon tool steel
- Adjustable resistance for the perfect feel
Specification
Product Data
| Colour | Black | |
|---|---|---|
| Construction | Steel |
General Properties
| Gross Weight | 0.201 | kg |
|---|
Due to the angle and serrations on the blades being designed specifically for composites use, you would tend to find that these composite shears will struggle to cut some thick and specialist upholstery fabrics
We would recommend selecting a dedicated upholstery/fabric shear for the most efficient cutting of those materials.
Yes, our Kevlar shears are ideal for cutting Diolen based fabrics. Diolen is similar in many of its characteristics to Aramid, including being difficult to cut with normal scissors.
These 8 inch shears are not available in a specific left handed version. However, we do have a left handed version of our normal Kevlar shears which you can see here:Professional 10 Inch Kevlar Shears Left Handed. They are primarily designed to cut Aramid based fibres but will also cut carbon fibres.
No, the sheet is too tough to be cut with these kind of shears. These shears are only designed to cut dry fabric. In reality, 1mm carbon fibre sheet is too thick to be cut but any type of scissor or shear. The simplest way to cut these sheets is with a rotary type cutting tool using a Perma-Grit 32mm Disc with Arbor.
However plenty of other power tools will work well such as dimension saws, jigsaws, band saws or even a grinder with a slotting disc. It is important to note that for best results use a metal cutting blade with fine teeth or a tungsten carbide gritted blade such as those from our Perma-Grit range of tools.
ASK YOUR OWN QUESTION
Customer Product Reviews for Professional 8 Inch Carbon/Kevlar Scissors
I did my self a favour when i bought it.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewSUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Login to submit a product reviewShipping Information
Non Hazardous
This product is not classed as dangerous goods for transport and can be shipped to all US addresses without restriction.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the cost for delivery of this item to your address, add it to your cart then use the instant shipping calculator on the cart page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2025. All rights reserved.